WS-CR Type Marine Clear View Screen
Clear view screen window WS-CR type marine Clear view screen is suitable for installation on the window of the ship cab. The motor installed in the center of the main frame directly drives the centrifugal force generated by the high-speed rotation of the glass disc, and immediately smashes the waves, rain, sputum and snow. Drop, so that the water can not be attached to the window, so as to maintain a clear view, this product is equipped with electric ice melting device, suitable for all-weather work. This product complies with the CB 644-92 "Clear view screen Window for Ships" standard. Main technical specifications: Power supply voltage: AC200V Power supply frequency: 50HZ/60HZ Wiping speed: 0.3~1.2m/s Motor input power: 500W Protection level: Out-of-window part: IP56 (under working condition) Window part: IP22 Installation wall thickness (mm ): (6, 8, 10, 12, 15, 19) High temperature water turns on the main power switch (SA1), and the system is powered. Open the water pump running switch (SA2), the pump will send circulating water into the diesel engine. When the water temperature is lower than the low temperature setting value (AL), the two heats collectors work at the same time; when the water temperature is higher than the low temperature set value (AL), When the temperature is lower than the high temperature set value (AH), the heater is turned off; when the water temperature is higher than the high temperature set value (AH), the two heaters stop working at the same time. At the same time, the advanced temperature switch located in the heater controls the start and stop of the two heaters according to the set value.