Life Jacket Light Concept

The marine life jacket light (also called the life jacket position indicator light) is a life saving device equipped on a life jacket, and is used in combination with a life jacket. In general, the lifejacket light is composed of the following parts, including a power source, a light clip, a light holder, a bead and a light cover, and the light clip and the light holder are embeddedly engaged, and the light cover has a main convex lens at the front end and a side front end. The annular auxiliary convex lens has a fixed distance hole on the light holder, a fixed distance rod frame on the light clip, and a fixed distance rod on the fixed distance rod frame. According to national standards, existing lifejacket light are required to increase the intensity of illumination in the direction of illumination under conditions of very small power supply capacity. Since there is an aura around the center of the illumination direction, the chance of being discovered by nighttime water users is increased. The lifejacket light is suitable for indicating the position of the life jacket or lifebuoy at sea to the ship's drowning personnel and rescuers at night for fast rescue purposes.

Technical requirements

1. Each lifejacket light should:

.1 the intensity of light in all directions of the upper hemisphere is not less than 0.75 cd;

.2 have an energy source capable of providing 0.75 cd light intensity for at least 8 hours;

.3 when attached to a life jacket, if practicable, see light in a larger part of the upper hemisphere;

.4 is white light.

2 If the light referred to above is a flash, it should also:

.1 with manual operation switch; and

.2 flash at a rate of not less than 50 flashes per minute and not more than 70 flashes, with an effective light intensity of at least 0.75 cd.